Double Sided 310 x 320mm Textured Pei and Magnetic PEI Sheet with Adhesive for CR-10S pro, CR-X, CR-10 pro V2, Ender 3 max, CR-10 V3，Anycubic Kobra Plus 3D Printers
J9910004-310*320-SP
$27.99 $29.79
- 1 The double sided 310*320mm pei is combined with 2 parts, a flexible steel platform coated with textured PEI surface on both sides and a magnetic bottom sheet with adhesive on the back
- 2 The HICTOP 310*320mm pei double sided is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
- 5 The size of HICTOP pei sheet is 310*320mm（12.2*12.6inch）, it is applicable with CR-10S pro, CR-X, CR-10 pro V2, Ender 3 max, CR-10 V3，Anycubic Kobra Plus 3D printers
Verwandte Artikel
) Prusa Mk3s PEI Sheet Double Sided Textured PEI Sheet PEI Build Plate for Prusa I3 MK3 MK3S MK3S+ MK2.5S 3D Printers
$16.50 $19.99
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer
$49.79 $57.00
1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not V1) 3D printer
2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in its slot, re-level
3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend, and heating sock.
4.Direct drive extruder, great support for flexible filament.
5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase.
Package Including
1 x Replacement Extrusion Kit for Artillery Sidewinder X1 3D Printer ( V2, V3, V4)
"
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X2 and Genius Pro 3D Printer
$49.00
- 1.Original replacement for Artillery Sidewinder X2 and Genius Pro 3D printer
- 2.The Sidewinder X2 Extrusion Replacement Kit comes with Auto bed leveling sensor.
- 3.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level
- 4.It is a complete upgraded hot end for the Artillery Sidewinder X2 & Genius Pro, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock.
- 5.Direct drive extruder, great support for flexible filament.
Feature:
An all-in-one single-nozzle extruder suitable for Sidewinder X2 and Genius Pro 3D printers.
Direct drive extruder, strong support for flexible filament.
Dedicated connector, one cable connection, convenient and clean.
Stable operation and good heat dissipation effect.
One-piece design, easy to install, 3 screws can be completed.
Specification:
Nozzle diameter: 0.4mm
Applicable models: suitable for Sidewinder X2 and Genius Pro
Packing list:
1* Replacement Extrusion Kit for Artillery Sidewinder X2 and Genius Pro 3D Printer(with auto level sensor)
Bambu Lab 0.4mm Nozzle CHT Hardened Steel High Flow Nozzle for Bambu Lab X1/X1C/P1P/ P1S 3D Printers 2 Pieces
$7.99 $8.99