Hotend for Anycubic Kobra 2, Kobra 2 Plus, Kobra 2 Max, Kobra 2 Pro, K

) Prusa Mk3s PEI Sheet Double Sided Textured PEI Sheet PEI Build Plate for Prusa I3 MK3 MK3S MK3S+ MK2.5S 3D Printers

$16.50 $19.99

1 The HICTOP double-sided pei is a flexible steel platform coated with textured PEI surface on both sides
2 The prusa mk3s pei sheet is very easy to use, simply place the steel platform with PEI surface on the top of the heated bed
3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
4 Prints come off 241*254mm (9.49*10inch) pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
5 The size of mk3s pei sheet is 241*254mm (9.49*10inch), it is applicable with Prusa I3 MK3 MK3S MK3S+ MK2.5S 3D printers

HICTOP 241*254mm(9.49*10inch) Prusa Mk3s PEI Sheet Double Sided Textured PEI Sheet PEI Build Plate for Prusa I3 MK3 MK3S MK3S+ MK2.5S 3D Printers
Size: 241*254mm (9.49*10inch)
Both sides are textured PEI sheet
Package included: 1 x double sided prusa mk3s pei sheet 241*254mm (9.49*10inch)

View full product details »

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

$49.79 $57.00

1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not V1) 3D printer

2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in its slot, re-level

3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend, and heating sock.

4.Direct drive extruder, great support for flexible filament.

5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase.

Package Including

1 x Replacement Extrusion Kit for Artillery Sidewinder X1 3D Printer ( V2, V3, V4)

"

View full product details »

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X2 and Genius Pro 3D Printer

$49.00

1.Original replacement for Artillery Sidewinder X2 and Genius Pro 3D printer
2.The Sidewinder X2 Extrusion Replacement Kit comes with Auto bed leveling sensor.
3.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level
4.It is a complete upgraded hot end for the Artillery Sidewinder X2 & Genius Pro, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock.
5.Direct drive extruder, great support for flexible filament.

Feature:
An all-in-one single-nozzle extruder suitable for Sidewinder X2 and Genius Pro 3D printers.
Direct drive extruder, strong support for flexible filament.
Dedicated connector, one cable connection, convenient and clean.
Stable operation and good heat dissipation effect.
One-piece design, easy to install, 3 screws can be completed.
Specification:
Nozzle diameter: 0.4mm
Applicable models: suitable for Sidewinder X2 and Genius Pro
Packing list:
1* Replacement Extrusion Kit for Artillery Sidewinder X2 and Genius Pro 3D Printer(with auto level sensor)

View full product details »

Bambu Lab 0.4mm Nozzle CHT Hardened Steel High Flow Nozzle for Bambu Lab X1/X1C/P1P/ P1S 3D Printers 2 Pieces

$7.99 $8.99

1.The CHT Hardened Steel High Flow Nozzle is compatible with Bambu Lab X1/X1C/P1P/ P1S 3D Printers
2.The size of the bambu lab hardened steel nozzle is 0.2mm/0.4mm/0.6mm(optional), if you need other sizes please write us message, then we will try to sell other sizes
3.The three holes hardened steel nozzle offers greater flow, which makes the high-speed printers even more powerful
4.Chromium-zirconium copper embedded in the inner hole makes the Bambu lab nozzle more wear-resistant, uniform heating, and fast and stable extrusion consumables
5.The Bambu lab nozzle is connect by thread, and in contact with the bottom step of the heatbreak to completely solve the phenomenon of falling off and reduce the possibility of leakage.

Description:
About HICTOP Bambu Lab Nozzle CHT Hardened Steel High Flow Nozzle for Bambu Lab X1/X1C/P1P/ P1S 3D Printers 2 Pieces
Max temperature: 550°C
Size: 0.2mm/0.4mm/0.6mm(optional)
Material: hardened steel
Printing consumables: PLA, ABS, PETG, TPU, PP, PC, NYLON, PEEK, PEI etc.

View full product details »

Hotend for Anycubic Kobra 2, Kobra 2 Plus, Kobra 2 Max, Kobra 2 Pro, Kobra 2 Neo 3D Printers 24V V5 J-Head Anycubic Kobra 2 hotend

Related Items

New Footer

News & Updates